Astribank is a versatile and powerful channel bank that was specifically designed for the Asterisk IP-PBX. Astribank supports all the common telephony lines and trunks: FXS, FXO, BRI, PRI and R2. The Astribank driver is a part of the standard Asterisk distribution. With Xorcom Rapid Live CD™, a fully operational Asterisk server with preconfigured FXS, FXO, BRI, PRI and R2 ports can be up and working in less than 3 minutes! The USB 2.0 interface supplied with the Asteribank server guarantees a reliable, extremely high bandwidth, hotpluggable solution that is not dependent on a PRI PCI card. The USB 2.0 plug-and-play connection can support, theoretically, over 3,000 concurrent calls on a single USB 2.0 port. The reliable, industry-standard USB connection eliminates the costly, cumbersome PRI cards that are needed for standard channel bank support, and adds unique features such as reliable fax support, transparent synchronization between Astribank units, an auxiliary system interface, and more.

Astribank Chassis
Each 19” 1U rack-mountable Astribank chassis accommodates up to four modules. Multiple Astribank units may be connected to a single Asterisk IP-PBX using different USB 2.0 ports, a USB 2.0 hub or a USB 2.0 PCI card.

Telecom Connector Option (TCO)
This option is available in units with 8 or more FXS ports. To streamline installation of multi-port systems, the TCO unites all FXS ports on the Astribank unit into a single telecom connector on the real panel. All front panel indicators and RJ11 connectors remain active and enable easy monitoring and maintenance. A cable for connecting the telecom connector to the patch-panel is included.

Input/Output (I/O) Ports
Analog units with FXS modules support I/O ports. The two output ports enable activation/deactivation of peripheral devices by dialing an extension number. A popular example of output port usage is to open a door by dialing an extension. The four input ports create an off-hook event in Asterisk. The dial plan can be configured to use this function to dial an extension, play a message, send an email, activate another device using the output ports, etc. Examples of possible input port usage include forwarding a call to specific numbers, and playing a pre-recorded message if the fire/burglar alarm goes off.

Core Features

• USB channel bank for Asterisk
• Supports FXS, FXO, BRI, PRI and R2
• Native Asterisk – no extra software or hardware required
• Input/Output ports for connecting peripheral devices
• From eight ports to hundreds of ports
• Telecom connection option
• Power drive for ISDN phones

Xorcom products at 888VoipStore.com: http://www.888VoipStore.com/xorcom

The Wildcard TDM800P is a half-length PCI 2.2-compliant, 8 port card for connecting analog telephones and analog POTS lines through a PC. It supports combinations of FXS and/or FXO modules for a total of 8 lines.

The TDM800P provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single PCI bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the TDM800P reduces part complexity, cable clutter, and points of failure.

The TDM800P contains two module banks. Each bank supports up to four analog interfaces. The module banks may be filled either with one standard Digium® quad analog module (FXS – S400M, FXO – X400M), or up to two standard Digium® single analog modules (FXS- S110M, FXO – X100M) enabling the creation of any combination of ports

The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior echo cancellation on both FXO and FXS interfaces.

If the hardware echo cancellation module is not installed, the TDM800P may be used in conjunction with Digium’s High Performance Echo Cancellation (HPEC) software, a commercial and toll quality hybrid echo cancellation solution. Digium’s HPEC provides 16ms to 128ms of selectable near-end ITU G.168 compliant echo cancellation in software.

Using this card in concert with Digium’s Asterisk® software, standard PC hardware, and the Linux® OS, you can create SME or SOHO telephony environments capable of satisfying the needs of small or medium business applications at an industry-leading price.

Digium Analog cards, with their interchangeable single and quad FXS and FXO modules can eliminate the requirement for separate channel banks or access gateways. Digium’s commercial, toll-free quality High Performance Echo Cancellation (HPEC) software is available to our analog customers at no additional cost. The optional VPMADT032 hardware echo cancellation module provides the same toll-quality HPEC but without the performance impact of a software based solution. Scaling of an analog card solution is accomplished by adding additional cards and FXO / FXS modules.

• 8 RJ-11 interfaces on a single PCI bracket
• 8 Ports for connecting analog telephones or POTS lines
• Half-length Analog Card
• Up to 4 Single FXS or FXO Modules, or 2 Quad FXS or FXO Modules
• High Performance Echo Cancellation (HPEC) Software (Optional)
• VoiceBus™ technology

Digium products at 888VoipStore.com: http://www.888voipstore.com/digium

The Digium® TDM410 is a half-length PCI 2.2-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines.

Using Digium’s Asterisk® software and standard PC hardware, one can create a telephony environment that includes all of the sophisticated features of a high-end business telephone system.

Using an industry-standard bursting, bus-mastering interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM410 eliminates the requirement for external gateways, with industry-leading performance and price. The trunk and station modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional TDM410 or other Digium analog interface cards.

Digium Analog cards, with there interchangeable single and quad FXS and FXO modules can eliminate the requirement for seperate channel banks or access gateways. Digiums commercial, toll-free quality High Performance Echo Cancellation (HPEC) software is available to our analog customers at no additional cost. The optional VPMADT032 hardware echo cancellation module provides the same toll-quality HPEC but without the perfoamce inpact of a software based solution. Scaling of an analog card solution is accomplished by adding additional cards and FXO / FXS modules.

Core Features

• 4 Ports for connecting analog telephones or POTS lines
• Half-length Analog Card
• Up to 4 FXS or FXO Modules
• High Performance Echo Cancellation (HPEC) Software (Optional)
• TDM410 for use with a PCI 2.2 compliant slot

Digium Products at 888Voipstore.com: http://www.888voipstore.com/digium

The PagePro IP Model VIP-204  is a SIP based paging server designed for use with virtually all IP based telephone systems. The unit provides 8 zones, groups thereof and all call paging. Up to 4 simultaneous non conflicting pages.  This PagePro IP unit can drive up to 65,000 IP speakers or 65,000 analog speakers or provide the audio source for legacy paging systems. It can simultaneously drive any combination of these paging applications. The VIP-204 can form the foundation of most paging projects. The 8 zones can be accessed individually or in flexible groups.  Multiple VIP-204 devices can be grouped together for expandability.  Provides feedback elimination.

Valcom PagePro IP VIP-204 allows paging from any SIP compliant telephone to 8 SIP page destinations. The SIP page destinations can be any of the VIP-204’s four analog outputs, any combination of those outputs, or any
combination of page groups from other Valcom VIP units. The four analog outputs on the VIP-204 are line level –10dBm audio outputs. These outputs are designed to directly drive up to 150 Valcom self-amplified speakers.
The outputs are also suitable for connection to an auxiliary input on a utility amplifier of a legacy paging system.

• Group Paging Features
  The PagePro IP Model VIP-204 allows SIP based phone systems to page any number of Valcom IP speakers, Valcom Amplified Speakers and Valcom VIP series analog paging gateways. Valcom multicast group paging features robust grouping and priority controls. These controls make it easy to distribute low priority announcements yet allow high priority paging to override ongoing announcements. The PagePro IP Model VIP-204 provides 8 IP zones and 1 analog output capable of driving a mix of Valcom self amplified overhead paging speakers and horns. You can assign one SIP access phone number for the analog port. The VIP-204 provides 8 fully customizable SIP identities that can access any combination of IP zones and the analog port. Analog paging functions can be seamlessly combined IP paging functions allowing powerful combinations of analog and IP paging.
• Group Paging Priority Feature
  Any page group or port can be assigned a priority. These priorities allow a logical scaled approach to group paging. An absolute priority can be assigned to allow for emergency override in any circumstance. Group paging priorities work locally or across ganged units in the same fashion allowing facility wide emergency paging. Red Phone functionality is easily achieved with either IP phone or analog handsets via a Valcom gateway.
• Feedback Elimination Feature
  The PagePro IP Model VIP-204 provides programmable store and forward capability for all paging accesses. This features records up to 30 seconds of audio, and then replays the audio when the page call is terminated. The number of times the recorded audio is played back can be set from 1 to 5. Some paging applications require live announcements. For these applications the store and forward capability can be turned on/off per page zone.
• Wiring Supervision Features
  The PagePro IP Model VIP-204 provides for supervision of field wiring. If a fault is detected in the wiring connecting the analog output to either speakers or amplifiers it can be reported to an external device or syslog facility.
• Audio Supervision Features
  The PagePro IP Model VIP-204 provides internal monitoring of the audio path from the network connection to the analog output connector and can report failures to an external device or syslog facility.
• Legacy Applications
  The PagePro IP Model VIP-204 provides 1 analog output that can easily be conditioned to drive any existing overhead paging system. Legacy paging features can be seamlessly combined allowing powerful combinations of legacy analog and IP paging.

Valcom VIP-204 Features

• Easy To Install
• Live or Recorded Messages
• 65,000 Speakers, Expandable To 256 IP Paging Zones
• Easily Connect Loudspeaker System To Existing Computer Networks
• Compatible With Cisco, Nortel, Avaya, Iwatsu And Most IP Telephone Systems
• Supports IP And Analog Amplified Speakers
• Supports IP Talkback Speakers
• Supports Legacy Paging Systems
• Synchronized Clock Compatibility
• PoE (802.3af) Or Local Power
• SIP And Multicast
• Network Supervision
• Feedback Eliminator
• Night Ring
• DHCP

Valcom products at 888VoipStore: http://www.888VoipStore.com/valcom

The VIP-170 series of IP Handsfree Talkback intercom with longline extender and dial code operated relay are the perfect solution to implementing Door Phone or similar functions in with modern IP telephone systems. In a door answer application, a visitor pressing the “Call” button on the doorplate receives a confirmation tone or recorded message and the unit initiates a call to any SIP telephone, SIP address, PC softphone, Valcom intercom station or to a Valcom IP gateway. When the called party answers, a handsfree talkback communication is enabled. The called party may dial code to activate a relay in the IP DoorPhone to unlock the door. When the called party terminates the call, the session is terminated automatically. The called party may be anywhere, across the street or across the world.. When used in a Command application, any location will automatically call the Command location. The Command location can call any station directly. The Command location can call any groups or can do an all call page using a single optional Valcom multicast Gateway.

Valcom VIP-172L Product Features

• Flush Mount Plate
• Call Button & LED
• POE (802.3af)
• Relay Contact for Door Unlock
• SIP DoorPhone w/ door/gate relay
• PoE (802.3af)
• Use with 3CX, trixbox, Asterisk, Cisco, Nortel, Avaya, and most modern IP Telephone systems
• Call button calls any SIP address or any Valcom Gateway
• Automatic Talkback VOX operation (no Push To Talk button needed)
• Includes long line extender – up to 300 meters
• Easy, RJ45 plug in, Cat 5 or 6, LAN /WAN 10/100
• Stainless Steel, Brass and Vandal proof (11 AWG Steel)
• For Security – Peer to Peer or Many to One
• SIP or Multicast Softphone addressable
• Door Ajar Notification Feature
• All Call 1000’s of units with Valcom Gateway
• LED Status Indicator

Product Links

• Valcom VIP-172L SIP Intercom – Stainless Steel
• Valcom VIP-172L SIP Intercom – Brass
• Valcom VIP-172L SIP Intercom – Vandal Resistant

Valcom products at 888VoipStore: http://www.888VoipStore.com/valcom

• Cisco SPA-501G Single Line Phone
• Cisco SPA-502G Dual Line Phone
• Cisco SPA-504G Four Line Phone
• Cisco SPA-508G Eight Line Phone
• Cisco SPA-509G Twelve Line Phone
• Cisco SPA-525G Five line phone w/Color LCD, Wifi, and Bluetooth

Source: VoipStore.com

Source: VoipStore.com

Source: VoipStore.com

Continue reading to view video…

Setting up a Grandstream GXP-2000 on trixbox Pro from Kerry Garrison on Vimeo.