Astribank is a versatile and powerful channel bank that was specifically designed for the Asterisk IP-PBX. Astribank supports all the common telephony lines and trunks: FXS, FXO, BRI, PRI and R2. The Astribank driver is a part of the standard Asterisk distribution. With Xorcom Rapid Live CD™, a fully operational Asterisk server with preconfigured FXS, FXO, BRI, PRI and R2 ports can be up and working in less than 3 minutes! The USB 2.0 interface supplied with the Asteribank server guarantees a reliable, extremely high bandwidth, hotpluggable solution that is not dependent on a PRI PCI card. The USB 2.0 plug-and-play connection can support, theoretically, over 3,000 concurrent calls on a single USB 2.0 port. The reliable, industry-standard USB connection eliminates the costly, cumbersome PRI cards that are needed for standard channel bank support, and adds unique features such as reliable fax support, transparent synchronization between Astribank units, an auxiliary system interface, and more.

Astribank Chassis
Each 19” 1U rack-mountable Astribank chassis accommodates up to four modules. Multiple Astribank units may be connected to a single Asterisk IP-PBX using different USB 2.0 ports, a USB 2.0 hub or a USB 2.0 PCI card.

Telecom Connector Option (TCO)
This option is available in units with 8 or more FXS ports. To streamline installation of multi-port systems, the TCO unites all FXS ports on the Astribank unit into a single telecom connector on the real panel. All front panel indicators and RJ11 connectors remain active and enable easy monitoring and maintenance. A cable for connecting the telecom connector to the patch-panel is included.

Input/Output (I/O) Ports
Analog units with FXS modules support I/O ports. The two output ports enable activation/deactivation of peripheral devices by dialing an extension number. A popular example of output port usage is to open a door by dialing an extension. The four input ports create an off-hook event in Asterisk. The dial plan can be configured to use this function to dial an extension, play a message, send an email, activate another device using the output ports, etc. Examples of possible input port usage include forwarding a call to specific numbers, and playing a pre-recorded message if the fire/burglar alarm goes off.

Core Features

• USB channel bank for Asterisk
• Supports FXS, FXO, BRI, PRI and R2
• Native Asterisk – no extra software or hardware required
• Input/Output ports for connecting peripheral devices
• From eight ports to hundreds of ports
• Telecom connection option
• Power drive for ISDN phones

Xorcom products at 888VoipStore.com: http://www.888VoipStore.com/xorcom

The Digium® TDM410 is a half-length PCI 2.2-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines.

Using Digium’s Asterisk® software and standard PC hardware, one can create a telephony environment that includes all of the sophisticated features of a high-end business telephone system.

Using an industry-standard bursting, bus-mastering interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM410 eliminates the requirement for external gateways, with industry-leading performance and price. The trunk and station modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional TDM410 or other Digium analog interface cards.

Digium Analog cards, with there interchangeable single and quad FXS and FXO modules can eliminate the requirement for seperate channel banks or access gateways. Digiums commercial, toll-free quality High Performance Echo Cancellation (HPEC) software is available to our analog customers at no additional cost. The optional VPMADT032 hardware echo cancellation module provides the same toll-quality HPEC but without the perfoamce inpact of a software based solution. Scaling of an analog card solution is accomplished by adding additional cards and FXO / FXS modules.

Core Features

• 4 Ports for connecting analog telephones or POTS lines
• Half-length Analog Card
• Up to 4 FXS or FXO Modules
• High Performance Echo Cancellation (HPEC) Software (Optional)
• TDM410 for use with a PCI 2.2 compliant slot

Digium Products at 888Voipstore.com: http://www.888voipstore.com/digium